Smoke extractor oem is very common in daily use, and there are many varieties on the market, but due to the lack of relevant professional knowledge, consumers encounter many difficulties in the process of purchasing dust collectors, and it is difficult for consumers to choose suitable products.

1. Select according to the quantity of processing gas.

The amount of gas processed is also a decisive factor in determining the size and type of smoke extractor oem. There is no doubt that it is appropriate to choose a dust collector with a large capacity to process gas. If multiple small volume collectors are used, it is often impractical to use them simultaneously. When a dust collector enters actual operation, it can be affected by operating and environmental conditions. Therefore, when determining the capacity of the equipment, it is impossible to predict. You can guarantee a certain room or space for certain devices.

2. Choose according to the dispersion and density of dust.

The dispersion of dust has a great influence on the performance of smoke extractor oem. The degree of dispersion of dust is the same, but due to different operating conditions, when selecting a dust collector, the degree of dispersion of dust must be accurately grasped. For example, when the particle size is larger than When the particle size is 10 μm, cyclone dust collector can be selected. When the particle size is less than a few microns, electrostatic precipitator and bag filter should be selected. Specific selections can also be combined with other selections and purchase requirements.

3. The temperature of the dusty gas also has a certain influence on the type selection.

The basic principle of smoke extractor oem is based on the temperature above the dust gas. In the wet dust collector, due to the evaporation of water and condensation after being discharged into the atmosphere, it should also be operated at low temperature as much as possible.

smoke extractor oem https://www.kaisenfilter.com/KSJ-2-2S-Welding-Fume-Extractor.html