Generally speaking, the detection of 1920*1080 pixels camera module does not have high requirements on the environment. Only strong electromagnetic interference or severe voltage fluctuations around the detection site will have adverse effects on the detection equipment; at the same time, the ambient temperature and humidity should meet the requirements of the equipment. Otherwise, it is very easy to cause damage to the 1920*1080 pixels camera module device. If the temperature is too low, the flexible probe will become hard and brittle, and the high temperature will affect the heat dissipation of the device. Too bright light will reduce the resolution of the human eye and affect the contrast of the detected image. Generally, it is not allowed to perform under strong light such as direct sunlight, and an indoor environment with soft and quiet light should be selected as much as possible.

The main function of the 1920*1080 pixels camera module is to detect pipelines, machinery, automobiles and other equipment that cannot be observed by the naked eye. Before the 1080 pixels camera module, you must understand the environment and requirements of the use, so as to better select the 1920*1080 pixels camera module.

When using the 1920*1080 pixels camera module, if its probe is inserted into the detection object for detection, the temperature to be detected inside must be lower than the maximum temperature that the lens can withstand, otherwise it will cause damage to its probe assembly; Fold the probe into dead folds smaller than its bend radius, otherwise the probe will be damaged.

The above is the explanation about the requirements of the 1920*1080 pixels camera module for the ambient temperature. The 1920*1080 pixels camera module must be operated according to the instruction manual, and the correct use of the 1920*1080 pixels camera module can maximize its function. meet the testing requirements.

1920*1080 pixels camera module https://www.hengal-tech.com/p-1920-1080-pixels/25.html